iAssist Bluetooth Oximeter records pulse oximeter measurements from an external Bluetooth pulse oximeter and displays the measured values.
* Pulse oximeter supports the Contec Bluetooth Wireless Fingertip Pulse Oximeter CMS-50EW
* Use 7762 pin for pairing to your phone
Instructions for bluetooth:
1) Enable your phone's Bluetooth
2) Enable your oximeter wireless/Bluetooth
3) Put your finger in oximeter
4) Tape on Magnifying glass icon and select SpO2
5) Enter 7762 pin code ( First time only )
6) Now you should get the values on your phone
The connection to phone will get disconnected due to oximeter saving energy feature after a minute.As the result, the values don't get updated.The work around this is to disable Bluetooth on your oximeter and then repeat steps 2-4 again.The app should show the disconnected message before performing steps 2-4.
Instructions for camera:
1) Put your finger on back camera
2) Wait for 5-20 seconds till the app to show the green check
Notes:
This App is developed by one person and it doesn't have the funding of major companies.The app has not been updated due to lack of time and resources.As a result it may not work with new devices.
I have a plan to update it so stay tuned for the update.
iAssist Bluetooth oxímetro registra mediciones oxímetro de pulso de un oxímetro de pulso Bluetooth externo y muestra los valores medidos.
* Oxímetro de pulso soporta el oxímetro de pulso inalámbrica Bluetooth dedo Contec CMS-50EW
* Utilice 7762 pines para el emparejamiento de su teléfono
Instrucciones para bluetooth:
1) Activar Bluetooth del teléfono
2) Permitir el oxímetro inalámbrica / Bluetooth
3) Poner el dedo en el oxímetro
4) Cinta en Icono de la lupa y seleccione SpO2
5) Entre 7762 código pin (Primera vez)
6) Ahora usted debe obtener los valores en su teléfono
La conexión con el teléfono obtendrá desconectado debido a la función de ahorro de energía oxímetro después de un minute.As el resultado, los valores no reciben updated.The trabajo alrededor de esto es desactivar Bluetooth en su oxímetro y repita los pasos 04.02 again.The aplicación debe mostrar el mensaje desconectado antes de realizar los pasos 2-4.
Instrucciones para la cámara:
1) Poner el dedo en la cámara trasera
2) Espere 5-20 segundos hasta que la aplicación para mostrar la marca de verificación verde
Notas:
Esta aplicación está desarrollada por una persona y no tiene la financiación de gran aplicación companies.The no se ha actualizado debido a la falta de tiempo y resources.As resultado puede que no funcione con nuevos dispositivos.
Tengo un plan para actualizarlo estancia tan sintonizado para la actualización.